Self-holding proximity switch for simplified sequencing.
| 文字サイズ |
|---|
Magnetic Proximity Switches
Memory type magnetic proximity switch PSMM-RPE1□ (Large-Capacity Type)
▼Features
◼ This is a memory-type proximity switch with built-in Bestact contacts, which is hardly affected by environmental influences such as dust, gases and high humidity, and providing outstanding contact reliability.
◼ The magnet self-maintains the contact state, simplifying the sequence.
◼ No mechanical wear and long life due to non-contact drive using magnets.
◼ No power supply is required for the drive.
◼ This is a memory-type proximity switch with built-in Bestact contacts, which is hardly affected by environmental influences such as dust, gases and high humidity, and providing outstanding contact reliability.
◼ The magnet self-maintains the contact state, simplifying the sequence.
◼ No mechanical wear and long life due to non-contact drive using magnets.
◼ No power supply is required for the drive.
Ratings and Specifications
Type | Switch Units | PSMM-RPE1 | PSMM-RPE1T2 |
Magnet Units | PSMM-MP15 | ||
Rated Sensitive Distance mm *1 | 15 (when mounted on non-magnetic materials) | ||
Maximum Sensitive Distance mm*1 | 8 to 16 | ||
Contact Arrangement | 1NO | ||
Incorporated Bestact | R15 | ||
Contact Performance | Refer to the BESTACT Type R25 & R15 specification table | ||
Rated Insulation Voltage | 250VAC (50/60Hz) | ||
Insulation Characteristics | Insulation Resistance | 100MΩ or greater (with 500VDC Megger) | |
Withstand Voltage (50/60Hz) | 1500VAC for 1 minute (Across Open Contacts: 800VAC) | ||
Vibration Resistance *2 | 49m/s² {5G} (10 to 55Hz) | ||
Shock Resistance *2 | 98m/s² {10G} | ||
Enclosure | Equivalent to IP52 | Equivalent to IP67 | |
Connecting method (Cable *3 | 0.75㎟ 2 conductors 1m long. | ||
Ambient Temperature (With no freezing or condensation) | Operating | -10 to +60℃ | |
Storage | -25 to +80℃ | ||
Approx. Weight | Switch Units | 100g | 150g |
Magnet Units | 100g | ||
Note: ＊1. At ambient temperature of +20℃. Sensitive distance where ambient temperature T (℃) can be calculated by the following equation.
Sensitive distance (mm) = Rated sensitive distance × {1-0.0018 (T-20)}
＊2. Values when the switch unit is mounted correctly on a non-magnetic material.
These values can decline depending on a magnetic material and mounting direction.
＊3. Only switch units are equipped with a cable.
Sensitive distance (mm) = Rated sensitive distance × {1-0.0018 (T-20)}
＊2. Values when the switch unit is mounted correctly on a non-magnetic material.
These values can decline depending on a magnetic material and mounting direction.
＊3. Only switch units are equipped with a cable.
Dimensions (㎜)
Operating Characteristics
Mounting Method
